Description
MiniPro™ PET 4 Vertical Electrophoresis Cell is used to run pre-casting gel and hand-casting gel, at most 4 pieces of gels are available simultaneously. The Electrophoresis Chamber is compatible with 1-D and 2-D electrophoresis application. The gel-casting frame and spacer glass plate make the activity of hand-casting gel simple and avoid the leakage.
Component
In order to achieve best performance, please read the instruction manual carefully and operate the instrument strictly according to the instruction manual.
Spacer glass plate: It is the relatively high glass plate with fastening side strip. There are 3 kinds of glass plate with the thickness of 0.75mm, 1.0mm, 1.5mm respectively.
Short glass plate: It is the relatively short glass plate and spacer glass plate to form the gel sandwich clamp.
Gel-casting frame: It is put on the desk and align the short glass plate with spacer glass plate, and make sure to form the gel sandwich clamp.
Components of gel clamp: 1 piece of gel casting frame, a piece of spacer glass plate and a piece of short glass plate.
Gel base: Pressure leverage grip the components of gel to sealing gasket closely to avoid the leakage of gel.
Gel sandwich: It consists of short glass plate and spacer glass plate as well as polymer gel.
Replacement plate for single gel: Transparent mound pressing baffle, it is used to cast 1 piece of gel or 3 pieces of gels.
Electrophoresis core: It is used to hold the gel sandwich and supply the U-sealing strip and upper and lower electrode as well as connecting plug. Anode is marked by red while the cathode is marked by black.
Technical specification
Buffer tank and upper lid: The buffer tank and the upper lid are closed to make sure the electrophoresis is conducted smoothly. The power is off when the upper lid is opened. The tank and upper lid are compatible with other electrophoresis module, such as the electrophoresis transfer, 2-D single direction electrophoresis and electrophoresis elution etc.
|
Maximum volume of sample |
|
|
|
|
|
Hole quantity |
Width of hole |
0.75 mm |
1.0 mm |
1.5 mm |
|
5 |
12.7 mm |
70 μl |
105 μl |
160 μl |
|
9 |
5.08 mm |
33 μl |
44 μl |
66 μl |
|
10 |
5.08 mm |
33 μl |
44 μl |
66 μl |
|
15 |
3.35 mm |
20 μl |
26 μl |
40 μl |
|
IPG |
6.2 mm |
---- |
420 μl |
730 μl |
|
Prep/2-D |
|
|
|
|
|
Reference well 3.1 mm |
13 μl |
17 μl |
30 μl |
|
|
Sample well |
71.7 mm |
310 μl |
400 μl |
680 μl |
|
|
|
|
|
|
Compatibility of chemical reagent:
All the components of ES-PET4 electrophoresis cell should be kept clear of acetone and ethyl alcohol. The damage caused by using the organic reagent is not covered by the guarantee policy.
The comb of ES-PET4 electrophoresis cell should be kept clear of 100% TEMED, whose structure will be damaged by long time friction of TEMED.
Safety instruction
The power is off when the upper lid is opened, never try to operate the electrophoresis when there is no upper lid.
Note: The safety standard is applied to the YEASEN product from design stage to production stage, and it would be safe in case of proper and right operation. Please do not improve or mend it by any means.